Fleshlight's Kenzie Reeves Cupcake Review - A Thrilling Experience

Design

I initially noticed that this sleeve came pre-powdered, which perhaps what made it feel so soft on initial use. I'm personally not a fan of using powder on sleeves so I gave it a thorough wash to remove it. I was delighted that the sleeve still remained soft after a few washes. The transparent sleeves tend to be more sticky but this one was nothing like that. The sleeve material is body safe comprised of Fleshlight's patented 100% phthalate-free SuperSkin™ material. The entry is definitely on the tight side but the design appears to open up for a roomy and likely very pleasurable experience. This is a full-sized Fleshlight having no trouble accommodating larger girth and length. The case itself is plastic and offers an adjustable end cap for controlling a level of suction.

Experience

Grabbing a water-based lube (and ensuring plenty is used) I was able to experience the soft SuperSkin™ sleeve. With a tight entry and yet roomy interior, it's a fun experience to push through the initial resistance and then feel very pleasured on each stroke. I was able to create varying intensity with both short and longer strokes. The tight entry offers quite a bit of pleasure on its own but the real fun begins further inside the sleeve.

I experimented with both suction and no suction. I tend to prefer none, but there was certainly a great amount experienced with the end cap fully closed. It takes a bit of lube to keep the fun going I found, I'd say that's typical with most full-sized Fleshlights. Especially when there are unique canal designs.

It took me a bit to get used to as the entry was very tight for me but it turned into a lot of fun. It definitely requires a good amount of lube and a strong erection to push through. As the lube wears out the intensity seems to go up. Some might use that to their advantage, whereas I found that a bit too stimulating at times.

Overall a fun experience, one that I find myself going back to!

Quality

Just like all Fleshlights the sleeve material feels great and doesn't have any off-putting odors. The plastic case is solid, easy to hold, and does not feel flimsy. The only complaint that I have is that the end cap has a tendency to rattle at times depending on the position. It's less annoying to simply remove it, but then it can a tad louder with each stroke. The end cap helps muffle the sound a bit. So there's a Goldilocks position to keep from creating too much suction and still reduce noise (and avoid a rattle). I haven't experience the end cap rattle on all Fleshlights, only some. That's the only area of improvement I'd like to see. Otherwise this product is solid and the sleeve feels absolutely fantastic. With good care this should hold up for repeated use.

Price

Purchasing directly from Fleshlight, with the plastic case, you can expect to pay around $80. You save $20 by purchasing the sleeve solely by itself. Definitely on the higher side for a manual stroker but right on target for full-sized Fleshlights. You're getting a product made in the USA and not shipped from overseas.

Materials and care

Like other full-sized Fleshlights, you must take care to rinse out the sleeve thoroughly and not invert the sleeve to clean it. The washing part is not time consuming nor is it complicated. The drying part certainly is and it's not unique to this sleeve in particular. With all the elaborate canal designs, it has a tendency to trap moisture, so it's crucial to completely dry these sleeves. I make it a habit to use a drying stick to soak up the majority of moisture and then set the case (with the sleeve inside, no caps on) over a fan to dry for at least an hour. That results in a completely dry sleeve. Of course always use a water-based lube. With those key things in mind this product should be easy enough to maintain.