Jane Wilde Main Squeeze Ultraskyn Stoker
- 3 Follow
- 0 Collect
- 0 Like
- 537 Read
- Report
Overall Rating
4.45/5
Product Design
4.6/5
Ease of use
4.6/5
4.4/5
Sensory Quality
4.2/5
Ease of Cleaning
- Price4.0/5
- Noise4.0/5
My verdict
A great stroker with nice stimulation throughout the different chambers, soft TPE, and a squeeze plate function if you need just a little extra sensation.
- Pros
- Realistic modeled opening
- High quality
- Large enough to accommodate longer and girthier penises
- Cons
- Large = heavy, sustained use might be tiring
- TPE is harder to keep clean than silicone
- Squeeze plate falls out during cleaning
Exclusive Deals From Our Affiliates
Design
The whole thing is encased in a black plastic shell with a top and bottom lid that both screw on/off. The top just take a small turn to pop open and then reveals the main part of the toy, which is a realistic vagina modeled after Jane Wilde. I have to say it looks pretty good, and even includes some slight texture in the flatter parts around the opening for that extra realism. As you unscrew the bottom cap you can see some small air holes that will control the suction variably with the amount the cap is unscrewed. On one side of the casing you can see the highlight feature, the squeeze plate, which allows you to add some extra pressure to one side as you use it.
Experience
I really enjoyed the feel of this sleeve, it's soft and their claims about it warming up are true, though I'd recommend running it in hot water for a little bit for the best experience. The various chambers inside all have slightly different feels and so you get great stimulation in the head as you pass through them, while maintaining sensation in the rest of your penis. There are slightly tighter and wider sections and the ridges that you pass through feel great. I wouldn't say it's anything above and beyond what other competitors offer, but it is very much on par. The squeeze plate is the highlight function, and to be honest it's a little bit of a gimmick. I can't say I noticed a huge difference, but if you do squeeze really tight it'll add a little bit of extra friction/sensation. I'll note that you almost need to hold it in place a little bit to prevent rattling and extra noise during use. I actually really liked that it was bigger and had some weight to it because it feels more substantial when you're fully inserted. The weight could be a little tiring for prolonged use but I don't think it'll be an issue for most people. Overall, I'd say it's a very nice medium stimulation stroker, nothing over the top but also not underwhelming.
Quality
The whole product feels pretty high quality. The casing is made from solid plastic, and the TPE is soft but still substantial. The texturing and design of the opening looks quite realistic and the small folds and ridges really add to the visual experience. The sleeve feels weighty and dense and generally it seems like it'll be good to use for a long time if maintained well.
Materials and care
The TPE sleeve pops right out of the plastic casing and it has an indented ring to hold it in place when you put it back. You can easily rinse off the casing and lids, and the only slight annoyance is that the "squeeze plate" will often pop off and just rattle around inside the casing when you do so. It slots right back into place easily though and just be sure to have it aligned when you reinsert the sleeve. The sleeve itself is cleaned like any other TPE sleeve and just needs a rinse with a toy cleanser (possibly a very gentle soap) after use. It has an open end so water will flow right through, and you can use your fingers to open up the entrance a little bit to help with that. Since it is a larger toy water tends to get stuck inside the ridged chambers and either a drying rod or a rolled up paper towel help wick away that moisture quicker. You definitely want to ensure that the inside of the sleeve is fully dry before storing to prevent any mold/mildew build up.
Exclusive Deals From Our Affiliates
